Value of PCB Hi-Pot Testing
PCB Hi-Pot testing, or Printed Circuit Board High-Potential testing, is a specific application of Hi-Pot testing that focuses on assessing the insulation integrity of printed circuit boards (PCBs). It is an essential quality control and safety test used in the electronics manufacturing industry to ensure…
Q: What is the Aerospace Industries Association (AIA)
A: The Aerospace Industries Association (AIA) is a trade association representing the aerospace and defense industry in the United States. It serves as a collective voice for companies involved in developing, manufacturing, and supplying aircraft, spacecraft, missiles, defense systems, and related technologies. The AIA acts…
Q: Explain Ingress Protection (IP) Ratings
A: IP ratings, also known as Ingress Protection ratings, are a standard classification system used to define the level of protection an enclosure provides against the intrusion of solids and liquids. These ratings often describe the degree of protection offered by various electronic devices, equipment,…
Q: What is a PCB Ground Plane
A: A PCB (Printed Circuit Board) ground plane refers to a large PCB area that provides a low-resistance, low-inductance path for electrical signals to return to the ground reference level. It’s essentially a layer or portion of the PCB connected to the ground potential or…
Q: What is Electronic Design Automation (EDA)
A: Electronic Design Automation (EDA) refers to a category of software tools and processes used in the design, analysis, and verification of electronic systems, including integrated circuits (ICs) and printed circuit boards (PCBs). EDA tools assist engineers and designers in creating complex electronic systems by…
Q: What is a PCB Solder Mask
A: A PCB solder mask, also known as solder resist or solder stop mask, is a protective layer applied to the surface of a PCB to insulate and prevent solder from unintentionally bridging or short-circuiting the electrical connections on the board during the soldering process….
Q: Why do Thermal Cycling Testing
A: Thermal cycling testing is a process used to evaluate the performance and reliability of a product when exposed to alternating thermal conditions. It involves subjecting the product to repeated cycles of temperature changes, typically between extreme hot and cold temperatures. Thermal cycling testing aims…
Q: What is a Bed of Nails Fixture
A: A bed of nails fixture, also known as a nail bed fixture or pogo pin test fixture, is a specialized electronic test fixture used for testing printed circuit boards (PCBs) or electronic components. It typically consists of a flat surface, often made of a…
Q: What is ISO 13485 Medical
A: ISO 13485 Medical is an international standard that specifies requirements for a quality management system for medical devices. It outlines the processes and controls that medical device manufacturers must follow to ensure their products’ safety, reliability, and effectiveness. Compliance with ISO 13485 demonstrates a…
Q: Why are PCB Assembly Workers Grounded
A: PCB assembly workers must often be grounded using ground straps or other grounding methods. This is to prevent the accumulation of static electricity on their bodies, which could potentially discharge and damage sensitive electronic components during the assembly process. Grounding helps ensure that static…
PCB Assembly: 3rd-Party Quality Assurance Benefits
ANZER is an ISO 9001:2015 and AS9100:2016 (aerospace) certified electronics design and manufacturing service provider for Original Equipment Manufacturers (OEMs). We train and certify our manufacturing personnel, ensuring accuracy throughout the process. Additionally, we foster individual commitment from all employees to exceed our customer quality…
Q: What is ISO 9001 Certification
A: ISO 9001 certification is a globally recognized standard for quality management systems. It provides a framework for organizations to establish processes and procedures to ensure consistent product or service quality, customer satisfaction, and continuous improvement. Achieving ISO 9001 certification signifies that a company meets…
Q: What is Electrical Conductivity
A: Electrical conductivity measures a material’s ability to conduct an electric current. It is the reciprocal of electrical resistivity. Materials with high electrical conductivity, such as metals, allow electric charges to flow easily. In contrast, materials with low electrical conductivity, such as insulators (rubber or…
ANZER CEO: Certified IPC Trainer
ANZER specializes in providing custom electronic engineering and production solutions. Expanding upon three (3) decades of service, ANZER supports a vision of a complete quality result for our customers. In doing so, all team members are educated and cross-trained in numerous facets of printed circuit…
Q: What is the Importance of PCB Cleanliness
A: PCB cleanliness is critically vital before soldering for several reasons: 1. Solderability: Clean PCB surfaces ensure proper wetting and adhesion of solder to the pads and components, resulting in robust and reliable solder joints. 2. Electrical Performance: Contaminants like dust, oils, or residues can interfere…
Q: What is Wave Soldering
A: Wave soldering is a manufacturing process used in electronics assembly to solder through-hole components to a printed circuit board (PCB). In this process, the PCB is passed over a wave of molten solder, which wets and solders the exposed metal leads of the components…