IPC-A-610 Certification Importance: Verifying the Previous Person’s Work
In electronic manufacturing, verifying and validating the work done by the previous person is crucial to ensure quality and reliability. This form of in-process “Quality Control” (QC) and “Quality Assurance” (QA) is one method used by ANZER to take advantage of each team member’s IPC-A-610 certification….
ANZER Recertifies Entire Manufacturing Staff to IPC-A-610 Standard
Akron, OH, March 5 – 7, 2024: IPC-A-610 training is a widely recognized standard published by the IPC (Association Connecting Electronics Industries) that provides visual acceptance criteria for electronic assemblies. At ANZER, IPC-A-610 training is valuable for our manufacturing staff, especially those involved in the…
Wire and Cable Manufacturing: Safety Standards and Regulations
Safety standards and regulations in wire and cable manufacturing are put in place to ensure the safety of workers, the quality of the products, and the protection of consumers. These standards and regulations vary by country and region, but some common elements are typically addressed….
IPC Standards Compliance: ANZER’s 8 Important Reasons
IPC (Institute for Printed Circuits) standards are a set of guidelines and specifications that govern the design, manufacturing, and testing of electronic assemblies, including printed circuit boards (PCBs) and electronic components. IPC standards compliance is essential at ANZER to help ensure the reliability and safety…
Wire and Cable Assemblies: Connectors and Terminations
Wire and cable assemblies are crucial components in various electrical and electronic systems. They consist of wires or cables that are connected to one another or other components using connectors and terminations. These connectors and termination methods are selected based on factors like the application,…
Value of PCB Hi-Pot Testing
PCB Hi-Pot testing, or Printed Circuit Board High-Potential testing, is a specific application of Hi-Pot testing that focuses on assessing the insulation integrity of printed circuit boards (PCBs). It is an essential quality control and safety test used in the electronics manufacturing industry to ensure…
Cold Solder Joints: Causes and Effects
Cold solder joints are a common issue in electronics manufacturing and repair. They occur when the solder joint doesn’t properly bond with the components or the printed circuit board (PCB), resulting in a weak and unreliable connection. Here are the causes and effects of cold…
Q: What are Stacked Microvias
A: Stacked microvias are microvia technology used in printed circuit boards (PCBs) and electronic packaging. Microvias are tiny, drilled holes in PCBs that connect different layers of the board, allowing for the routing of electrical signals. Stacked microvias are designed to provide additional routing flexibility…
Q: In-Circuit Test (ICT): Why so Important
A: In-circuit test (ICT) is a widely used electronic testing method in the manufacturing and quality control of printed circuit boards (PCBs) and electronic assemblies. ICT is designed to identify defects and verify the functionality of individual components and connections on a PCB while it…
Implementing Corrective Actions in PCB Assemblies
Implementing corrective actions in PCB (Printed Circuit Board) assemblies involves identifying and addressing issues that arise during the manufacturing, testing, or operational phases. These actions ensure that the final product meets quality standards and functional requirements. Here’s a general process for implementing corrective actions in…
PCB-to-Wire Connections: Pull Test Validating
A pull test for PCB-to-wire connections is a mechanical test used to determine the strength of the connection between a printed circuit board (PCB) and a wire or cable. This test ensures that the soldered or crimped connections between the wires and the PCB pads…
Electronic Manufacturing Equipment Traceability Described
Electronic manufacturing equipment traceability refers to the ability to track and document the various stages and components involved in the manufacturing process of electronic products. It involves capturing and recording information about the materials, processes, and personnel involved in producing electronic devices, such as printed…
Center of Quality: Association Connecting Electronics Industries (IPC)
IPC certifications are industry-recognized credentials for electronics manufacturing and repair professionals. They are awarded by the Association Connecting Electronics Industries (IPC) and signify expertise in various aspects of electronics assembly, repair, and quality control. Some standard IPC certifications include: 1. IPC-A-610: Acceptability of Electronic Assemblies…
About IPC J-STD-001: Electronics Industry Soldering Standards
IPC J-STD-001 is a widely recognized standard in the electronics industry that provides requirements for the manufacturing and assembly electronic assemblies. It is officially titled “Requirements for Soldered Electrical and Electronic Assemblies.” The IPC (Institute of Printed Circuits), now known as IPC-Association Connecting Electronics Industries,…
Q: Explain Printed Circuit Board Vias
A: PCB Vias, short for “Printed Circuit Board Vias,” are essential components in electronic circuit design. A PCB Via is a conductive hole or pathway connecting different multilayer printed circuit board layers. They provide a means for electrical signals and power to pass between the…
Q: International Electrotechnical Commission (IEC): What Purpose
A: The International Electrotechnical Commission (IEC) is an international standardization organization that develops and publishes standards for electrical, electronic, and related technologies. Founded in 1906, the IEC is crucial in creating global standards that facilitate the interoperability, safety, and efficiency of electrical and electronic devices,…
Q: What is a PCB Ground Plane
A: A PCB (Printed Circuit Board) ground plane refers to a large PCB area that provides a low-resistance, low-inductance path for electrical signals to return to the ground reference level. It’s essentially a layer or portion of the PCB connected to the ground potential or…
Q: PCBs or Printed Circuit Boards – What Are They
A: Printed Circuit Boards (PCBs) are essential components used in electronic devices to provide a mechanical and electrical foundation for the various components that make up the device. They are flat boards made from insulating materials like fiberglass, with a thin layer of conductive material…
Q: What is Electronic Design Automation (EDA)
A: Electronic Design Automation (EDA) refers to a category of software tools and processes used in the design, analysis, and verification of electronic systems, including integrated circuits (ICs) and printed circuit boards (PCBs). EDA tools assist engineers and designers in creating complex electronic systems by…
Q: Why do Thermal Cycling Testing
A: Thermal cycling testing is a process used to evaluate the performance and reliability of a product when exposed to alternating thermal conditions. It involves subjecting the product to repeated cycles of temperature changes, typically between extreme hot and cold temperatures. Thermal cycling testing aims…