Difference Between Solder Flux and Solder Paste
Solder flux and solder paste are two different materials used in soldering processes, each serving a specific purpose in electronics assembly. Here are the critical differences between them: In summary, soldering flux is primarily used to clean and prepare soldering surfaces. In contrast, holding paste…
Wireless Technology Overview
Wireless technology refers to the transmission of data or information between devices without the need for physical cables or wires. There are various types of wireless technologies, each with its own set of characteristics and applications. Here are some of the most common types of…
Electronic Point-to-Point Communication Protocols
Electronic point-to-point communication protocols are methods used to establish direct communication between two electronic devices or systems. These protocols facilitate the exchange of data, commands, and sometimes power between the devices, allowing them to work together and share information. Here’s a breakdown of how electronic…
Electronics Manufacturing in Ohio
Electronics manufacturing in Ohio refers to the processes involved in producing electronic components, devices, and equipment within Ohio, USA. Ohio has a significant presence in the electronics manufacturing industry, with various companies designing, assembling, and producing a wide range of electronic products. These products include…
Manufacturing Wiring Harnesses: Quality Testing
Testing manufacturing wiring harnesses is crucial to ensure their quality, reliability, and safety. Wiring harnesses organize and bundle wires and cables that transmit electrical signals within various devices, vehicles, or equipment. Proper testing helps identify faults or defects that might lead to malfunctions, shorts, or…
Q: Explain Ethernet/IP
A: Ethernet/IP (Ethernet Industrial Protocol) is a widely used industrial communication protocol that is based on Ethernet technology and the Internet Protocol (IP). It is specifically designed for industrial automation applications, allowing different devices and systems to communicate and share data within industrial networks. Ethernet/IP…
Clean versus No-Clean Solder Paste
Clean versus No-Clean Solder Paste…both are used in the electronics manufacturing process, specifically for soldering components onto printed circuit boards (PCBs). Let’s delve into what each type entails and why they might be chosen: Due to these potential issues, clean solder paste requires thorough cleaning…
Electronic Components: PCB Building Blocks
An electronic component is a basic building block used in electronic circuits to manipulate and control the flow of electric current. These components are used to create complex electronic devices, systems, and equipment that perform various functions. Electronic components come in various types, each with…
Contract PCB Assembly: ANZER Does
Contract PCB assembly refers to the outsourcing of the assembly and manufacturing processes of printed circuit boards to a third-party company or manufacturer. Printed circuit boards are essential components in electronic devices, serving as the platform for connecting and supporting various electronic components like resistors,…
SMT Assembly: Using a Reflow Oven
A reflow oven is a piece of equipment commonly used in the electronics manufacturing process to solder surface-mounted components onto printed circuit boards (PCBs). Surface-mounted components are those that are attached to the surface of the PCB rather than being inserted through holes in the…
Electronic PCB Small-Batch Runs: ANZER Does
Electronic PCB small-batch runs refer to producing a relatively small number of PCBs for a particular project or product. PCBs are essential components in electronic devices, providing a platform for connecting and supporting various electronic components like resistors, capacitors, integrated circuits, and more. Electronic PCB…
Programming Microprocessor-Based PCBs
Programming microprocessor-based PCBs (Printed Circuit Boards) involves several steps to ensure that the microprocessor is correctly integrated into the board and that its firmware or software is properly loaded and executed. Here’s a general process for programming a microprocessor-based PCB: Remember that specific details and…
Electronic Manufacturing Equipment Calibration Importance
Manufacturing equipment calibration is a process used to ensure that measurement and testing instruments used in manufacturing processes are accurate and provide reliable results. Calibration involves comparing the measurements taken by a particular instrument to a known, standardized reference value. If any discrepancies are found,…
Examples of Electronic Subsystems
Electronic subsystems are functional units within a larger electronic system or device. Electronic systems often consist of various components and circuits that work together to perform specific tasks or functions. These systems can be quite complex and are often divided into smaller subsystems to facilitate…
Q: IPC Standards: What is A-610 Certification
A: IPC-A-610 is a certification program developed by the Association Connecting Electronics Industries (IPC) that outlines the requirements for the acceptability of electronic assemblies. The IPC-A-610 certification training is designed to educate individuals about the criteria and standards for accepting and rejecting electronic assemblies based…
Q: PCB Soldering Problems: What Are They
A: PCB soldering problems can sometimes present challenges, leading to unexpected results. Here are some of the most common issues: To avoid these common soldering problems, it’s important to use appropriate tools, techniques, and safety precautions. Regular practice and continuous learning can help improve your…
U.S.A. Electronic Manufacturing Benefits
U.S.A. electronic manufacturing benefits commercial enterprises ranging from increased quality management to measurable cost efficiencies. It is also essential to consider the savings on shipping, import duties, and improved lead times. Some of these advantages to consider: Higher Quality Control Few things compare in importance…
Creating an Electronic Design BOM (Bill of Materials)
An Electronic Design BOM or Bill of Materials is a comprehensive list of all the components, parts, materials, and sub-assemblies required to manufacture and assemble an electronic product. It is a detailed reference for engineers, manufacturers, and procurement teams to understand and source the necessary…
AC and DC Current: Differences
Alternating Current (AC) and Direct Current (DC) are two fundamental types of electric currents, each with distinct characteristics. Here are the main differences between AC and DC current: In summary, AC and DC current have different properties and applications, and each type has its advantages…
PCB Lines and Traces: Why Size Matters
The sizes of PCB lines and traces can vary widely depending on the specific design requirements, the technology used in manufacturing, and the application of the PCB. Here are some typical sizes for different types of PCB traces: It’s important to note that these values…