Q: What is Surface Mount Technology
A: Surface Mount Technology (SMT) is a method of electronics manufacturing that involves placing and soldering surface mount components directly onto a printed circuit board (PCB) surface. It has become the dominant assembly method in the electronics industry due to its smaller footprint, higher component…
Q: What Determines Solder Joint Strength
A: The solder joint strength is not determined by whether they are “leaded” or “non-leaded” but by factors such as the solder composition, joint design, and application method. Leaded solder typically contains a small amount of lead, which helps to lower the melting temperature and…
Q: How do Axial and Radial Lead Components Differ
A: Axial and radial lead components are specific types of through-hole components, referring to the orientation of their leads. Axial lead components have leads from opposite ends of the component body and are aligned along the same axis or in a straight line. This component…
Q: What is Proper Wire Splicing
A: Wire splicing is a technique that combines two or more wires to create a secure electrical connection. It involves removing the insulation from the wires’ ends, twisting them together, and securing them with a connector or insulation tape. Wire splicing is commonly used in…
Q: What is a Soldering Iron
A: A soldering iron is a handheld tool used to join and repair metal components by melting and flowing solder onto the joint. It comprises a heated metal tip, often copper or iron, an insulated handle, and a power cord. The soldering iron tip can…
Q: What are Flying Leads
A: Flying leads refers to an electrical cable or wire not permanently attached to a device or equipment. Instead, it has one or both ends left unconnected, allowing it to be easily connected or disconnected as needed. These leads are typically used in prototyping, testing,…
Q: Why use the Six Sigma Methodology
A: Six Sigma methodology is a data-driven approach organizations use to improve business processes and reduce defects or errors. Motorola first developed it in the 1980s, and many other companies have widely adopted it. The goal of Six Sigma is to minimize variation in processes…
Q: What is Zero Defects Concept
A: Zero defects is a concept in quality management that aims to achieve perfection by eliminating all defects or errors in a product or process. It involves a proactive and systematic approach to identify and eliminate any potential sources of defects. The goal is to…
Q: What is a Controller Area Network (CAN)
A: Controller Area Network (CAN) is a communication protocol commonly used in automotive and industrial applications. A serial communication protocol allows communication between various electronic control units (ECUs) or devices within a system. Robert Bosch GmbH originally developed CAN in the 1980s to address the…
Q: What is DeviceNet Network Protocol
A: DeviceNet is a network protocol used in industrial automation to connect and communicate between various devices in a control system. A communication bus system allows sensors, actuators, and controllers to exchange data and control signals over a shared network. DeviceNet uses Controller Area Network…
Q: Why do Thermal Cycling Testing
A: Thermal cycling testing is a process used to evaluate the performance and reliability of a product when exposed to alternating thermal conditions. It involves subjecting the product to repeated cycles of temperature changes, typically between extreme hot and cold temperatures. Thermal cycling testing aims…
Q: What is a Bed of Nails Fixture
A: A bed of nails fixture, also known as a nail bed fixture or pogo pin test fixture, is a specialized electronic test fixture used for testing printed circuit boards (PCBs) or electronic components. It typically consists of a flat surface, often made of a…
Q: What are Pre-tinning Solder Joints
A: Pre-tinning solder joints refer to applying a thin layer of solder on the metal surfaces intended to be joined together using soldering techniques. This is typically done to improve the quality of the solder connection and ensure a robust and reliable bond between the…
Q: What is Potting Electronic Assemblies
A: Potting electronic assemblies is the process of encapsulating or filling the electronic components and circuitry with a protective material, usually a liquid or semi-liquid compound referred to as potting compound or potting material. This provides physical protection, insulation, and environmental resistance to the electronic…
Q: What are Electronic Manufacturing Services
A: Electronic Manufacturing Services (EMS) refer to the contract manufacturing services provided by specialized companies for the design, assembly, testing, and delivery of electronic components and products. EMS companies offer a range of services to their clients, including product development, prototyping, engineering support, supply chain…
Q: What is a Women’s Business Enterprise (WBE)
A: WBE certification stands for Women’s Business Enterprise certification. It is a formal recognition given to businesses that are majority-owned, operated, and controlled by women. This certification is typically issued by a third-party organization, such as the Women’s Business Enterprise National Council (WBENC) in the…
Q: What is a Minority Business Enterprise (MBE)
A: MBE certification stands for Minority Business Enterprise certification. It is a recognition given to businesses owned, operated, and controlled by individuals from minority groups. This certification is typically provided by an independent third-party organization or government agency that promotes and supports diversity in business….
Q: What is ISO 13485 Medical
A: ISO 13485 Medical is an international standard that specifies requirements for a quality management system for medical devices. It outlines the processes and controls that medical device manufacturers must follow to ensure their products’ safety, reliability, and effectiveness. Compliance with ISO 13485 demonstrates a…
Q: What is Flex PCB Construction
A: Flex PCB construction, also known as a flexible printed circuit board (FPCB), is typically made from a thin, flexible substrate such as polyimide or polyester. These materials allow the circuit to bend and conform to various shapes, making them ideal for applications where traditional…
Q: What is Solder Paste Silk-screening in SMT Components Assembly
A: Solder paste silkscreening is used in electronics manufacturing to apply solder paste onto printed circuit boards (PCBs) before soldering components inSMT components assembly. It involves using silkscreen or stencil to deposit a controlled amount of solder paste onto the PCB’s pads. This paste acts…