{"id":1223,"date":"2023-09-19T00:45:34","date_gmt":"2023-09-19T00:45:34","guid":{"rendered":"https:\/\/www.anzer-usa.com\/resources\/?p=1223"},"modified":"2026-05-29T12:16:33","modified_gmt":"2026-05-29T12:16:33","slug":"pcb-assembly-dielectric-properties","status":"publish","type":"post","link":"https:\/\/www.anzer-usa.com\/resources\/pcb-assembly-dielectric-properties\/","title":{"rendered":"PCB Assembly Dielectric Properties: 8 Material Factors OEMs Should Review Before Build"},"content":{"rendered":"\n<p>PCB assembly dielectric properties control more than insulation. They affect signal speed, impedance, leakage risk, breakdown voltage, heat movement, moisture stability, flame behavior, and long-term field reliability. For OEMs, the main point is simple: dielectric requirements should be reviewed before PCB fabrication and assembly, not after first-article failure or functional test issues.<\/p>\n\n\n\n<p>At ANZER USA, we treat dielectric properties as part of the broader manufacturability conversation. The board material, stackup, copper geometry, coating requirement, testing method, and end-use environment all need to work together before the design reaches SMT, through-hole, inspection, and final assembly.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What are PCB assembly dielectric properties?<\/h2>\n\n\n\n<p>PCB assembly dielectric properties describe how the non-conductive material in a printed circuit board behaves electrically, thermally, chemically, and mechanically.<\/p>\n\n\n\n<p>That dielectric material sits between copper layers and around conductive features. It helps prevent unintended current flow, supports controlled impedance, affects how signals move through the circuit, and influences how the board behaves under voltage, heat, humidity, vibration, soldering, coating, and potting.<\/p>\n\n\n\n<p>For a simple low-speed board, standard FR-4 may be suitable. For high-speed digital, RF, high-voltage, aerospace, medical, industrial automation, or outdoor electronics, dielectric behavior can become a design and manufacturing risk if it is not specified clearly.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why dielectric properties matter before PCB assembly<\/h2>\n\n\n\n<p>Many dielectric decisions are made during design and fabrication, but their effects show up during assembly and testing.<\/p>\n\n\n\n<p>A board may pass layout review and still create problems if the laminate, stackup, dielectric thickness, copper roughness, soldering profile, coating process, or test plan does not match the application. That is why dielectric review belongs inside the early <a href=\"https:\/\/www.anzer-usa.com\/electronic-design-for-manufacturability\">electronic design for manufacturability<\/a> process.<\/p>\n\n\n\n<p>Dielectric properties can affect:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Area<\/th><th>Why it matters to OEM buyers<\/th><\/tr><\/thead><tbody><tr><td>Signal integrity<\/td><td>Dk, Df, copper geometry, and dielectric thickness influence impedance, signal speed, loss, crosstalk, and timing.<\/td><\/tr><tr><td>Electrical safety<\/td><td>Dielectric strength and insulation resistance help prevent breakdown, leakage, and unintended conductive paths.<\/td><\/tr><tr><td>Thermal reliability<\/td><td>Thermal conductivity, Tg, CTE, and laminate stability affect soldering, rework tolerance, and field operation.<\/td><\/tr><tr><td>Environmental durability<\/td><td>Moisture absorption and chemical exposure can shift electrical behavior and increase reliability risk.<\/td><\/tr><tr><td>Assembly process control<\/td><td>Laminate stability affects soldering, inspection, coating, potting, and rework decisions.<\/td><\/tr><tr><td>Procurement accuracy<\/td><td>Material callouts, approved alternates, impedance notes, and test requirements reduce ambiguity before RFQ.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>For OEM teams, the goal is not to memorize every laminate parameter. The goal is to know which dielectric requirements must be controlled, documented, and reviewed before build.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Dielectric constant, Dk<\/h2>\n\n\n\n<p>Dielectric constant, often called Dk or relative permittivity, describes how much the board material slows an electrical signal compared with a vacuum.<\/p>\n\n\n\n<p>In practical PCB work, Dk affects:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Signal propagation speed<\/li>\n\n\n\n<li>Controlled impedance<\/li>\n\n\n\n<li>Capacitance between conductors<\/li>\n\n\n\n<li>Crosstalk sensitivity<\/li>\n\n\n\n<li>RF and high-speed timing behavior<\/li>\n\n\n\n<li>Physical trace geometry needed for a target impedance<\/li>\n<\/ul>\n\n\n\n<p>A lower Dk generally allows faster signal propagation. A higher Dk can allow smaller circuit geometry in some RF designs, but it is not automatically better. The right Dk depends on the circuit frequency, stackup, trace geometry, target impedance, material tolerance, temperature range, and available laminate options.<\/p>\n\n\n\n<p>The mistake I see in DFM conversations is treating Dk as one fixed number. It is not that simple. Dk can vary by frequency, measurement method, material construction, glass weave, resin content, thickness, temperature, and supplier datasheet conditions. That is why controlled-impedance designs should include a real stackup and target impedance notes, not just a generic material name.<\/p>\n\n\n\n<p>For deeper related reading, connect this section to ANZER\u2019s guide on <a href=\"https:\/\/www.anzer-usa.com\/resources\/impedance-control-in-high-speed-digital-boards\/\">impedance control in high-speed digital boards<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Dissipation factor, Df<\/h2>\n\n\n\n<p>Dissipation factor, also called Df or loss tangent, describes how much signal energy is lost as heat when the signal moves through the dielectric material.<\/p>\n\n\n\n<p>Df matters more as signal speed and frequency increase. In low-speed control electronics, it may not be a limiting factor. In RF, microwave, high-speed serial, fast edge-rate, or dense multilayer boards, dielectric loss can affect insertion loss, eye diagram margin, timing, and heat.<\/p>\n\n\n\n<p>OEM buyers should not only ask, \u201cWhat laminate is cheapest?\u201d A better question is:<\/p>\n\n\n\n<p>Will the selected dielectric material support the frequency, loss budget, thermal condition, and product life expected in the application?<\/p>\n\n\n\n<p>For high-speed or RF work, ask the design team or fabricator to document Dk and Df values at a relevant test frequency and to confirm approved laminate alternates. If the RFQ only says \u201cFR-4\u201d but the design needs controlled loss behavior, the build package is incomplete.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Dielectric strength<\/h2>\n\n\n\n<p>Dielectric strength is the maximum electric field a dielectric material can withstand before electrical breakdown occurs.<\/p>\n\n\n\n<p>In PCB assemblies, dielectric strength becomes important when the board includes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Higher operating voltage<\/li>\n\n\n\n<li>Dense spacing between conductors<\/li>\n\n\n\n<li>Power conversion sections<\/li>\n\n\n\n<li>Surge or transient exposure<\/li>\n\n\n\n<li>Isolation barriers<\/li>\n\n\n\n<li>Harsh operating conditions<\/li>\n\n\n\n<li>Safety-sensitive electronics<\/li>\n<\/ul>\n\n\n\n<p>A dielectric breakdown problem is not always visible during a basic visual inspection. It can appear during hipot testing, field stress, contamination exposure, moisture exposure, or long-term operation.<\/p>\n\n\n\n<p>For high-voltage or safety-sensitive designs, the RFQ package should include voltage requirements, spacing constraints, test requirements, coating expectations, and applicable safety or industry requirements. ANZER can then review assembly feasibility, inspection expectations, and testing alignment before production.<\/p>\n\n\n\n<p>Related internal reading: <a href=\"https:\/\/www.anzer-usa.com\/resources\/pcb-hi-pot-testing\/\">PCB hi-pot testing<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Insulation resistance<\/h2>\n\n\n\n<p>Insulation resistance measures how strongly the dielectric material resists unintended current flow.<\/p>\n\n\n\n<p>Low insulation resistance can lead to leakage current, intermittent behavior, measurement drift, false signals, battery drain, or field reliability issues. The risk increases when assemblies are exposed to moisture, ionic residues, contamination, flux residues, condensation, or high humidity.<\/p>\n\n\n\n<p>Insulation resistance should be reviewed carefully for:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Medical electronics<\/li>\n\n\n\n<li>Aerospace assemblies<\/li>\n\n\n\n<li>Industrial automation controls<\/li>\n\n\n\n<li>Outdoor electronics<\/li>\n\n\n\n<li>Sensor circuits<\/li>\n\n\n\n<li>Battery-powered assemblies<\/li>\n\n\n\n<li>High-impedance analog circuits<\/li>\n\n\n\n<li>Coated or potted PCBAs<\/li>\n<\/ul>\n\n\n\n<p>Assembly cleanliness, soldering process control, conformal coating, potting, and test coverage all matter. ANZER\u2019s <a href=\"https:\/\/www.anzer-usa.com\/ipc-total-quality-management\">IPC total quality management<\/a> approach is relevant here because workmanship, inspection, and process discipline help protect the design intent after fabrication.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Thermal conductivity and heat behavior<\/h2>\n\n\n\n<p>Dielectric material does not only insulate electrically. It also affects how heat moves through the PCB.<\/p>\n\n\n\n<p>Thermal behavior matters when the assembly includes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Power electronics<\/li>\n\n\n\n<li>Voltage regulators<\/li>\n\n\n\n<li>Motor drives<\/li>\n\n\n\n<li>LED systems<\/li>\n\n\n\n<li>Dense SMT components<\/li>\n\n\n\n<li>High-current traces<\/li>\n\n\n\n<li>Components with limited thermal margin<\/li>\n\n\n\n<li>Enclosed box-build systems<\/li>\n<\/ul>\n\n\n\n<p>The dielectric layer, copper weight, copper planes, via strategy, component placement, heat sinking, enclosure airflow, coating, and potting all work together. If the board material has poor thermal behavior for the application, the assembly may pass initial function but run hot in the field.<\/p>\n\n\n\n<p>This is where PCB assembly and box build thinking need to connect. A board that looks fine on the bench may behave differently inside an enclosure. For system-level programs, the PCB thermal plan should be reviewed with the enclosure, harness routing, airflow, and test procedure in mind.<\/p>\n\n\n\n<p>Related internal reading: <a href=\"https:\/\/www.anzer-usa.com\/resources\/thermal-management-designing-pcbs-for-high-heat-applications\/\">thermal management for high-heat PCB applications<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Moisture absorption<\/h2>\n\n\n\n<p>Moisture absorption describes how much moisture a dielectric material can absorb from the environment.<\/p>\n\n\n\n<p>Moisture can affect dielectric behavior, insulation resistance, dimensional stability, soldering reliability, and long-term performance. The risk is higher for assemblies used in humid, outdoor, washdown, agricultural, transportation, medical, aerospace, or industrial environments.<\/p>\n\n\n\n<p>Moisture risk should be considered before choosing coating or potting. Conformal coating can help protect PCB assemblies from moisture, dust, chemicals, and stress. Potting provides stronger encapsulation when the assembly needs more complete environmental protection.<\/p>\n\n\n\n<p>ANZER performs both <a href=\"https:\/\/www.anzer-usa.com\/resources\/conformal-coating-pcb-assemblies\/\">conformal coating for PCB assemblies<\/a> and potting in-house, which helps reduce outsourcing friction and keeps environmental protection tied to the assembly process.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Flame retardancy<\/h2>\n\n\n\n<p>Flame retardancy describes how the PCB material behaves when exposed to ignition or fire conditions.<\/p>\n\n\n\n<p>For many electronics, buyers will see terms such as FR-4 and UL 94 V-0 in material discussions. The important point is not just the label. The final product environment, voltage level, enclosure design, safety requirements, regulatory expectations, and material documentation all need to match.<\/p>\n\n\n\n<p>OEM teams should confirm whether the end product requires a specific flame rating, recognized material, safety file, or customer documentation package. That requirement should be part of the RFQ, not discovered after the first production lot.<\/p>\n\n\n\n<p>Flame behavior also connects to procurement discipline. If material alternates are allowed, they should be approved alternates, not uncontrolled substitutions.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Dielectric thickness and layer stackup<\/h2>\n\n\n\n<p>Dielectric thickness is the distance between conductive layers or traces separated by insulating material.<\/p>\n\n\n\n<p>It affects:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Controlled impedance<\/li>\n\n\n\n<li>Capacitance between copper features<\/li>\n\n\n\n<li>Voltage spacing<\/li>\n\n\n\n<li>Board thickness<\/li>\n\n\n\n<li>Mechanical stiffness<\/li>\n\n\n\n<li>Lamination complexity<\/li>\n\n\n\n<li>Signal coupling<\/li>\n\n\n\n<li>Fabrication tolerance<\/li>\n<\/ul>\n\n\n\n<p>For controlled-impedance boards, dielectric thickness cannot be treated as a generic value. The stackup must define copper layers, dielectric thickness, material type, copper weight, target impedance, tolerance, and reference planes.<\/p>\n\n\n\n<p>Before sending a PCB assembly RFQ, OEM teams should provide the stackup drawing or fabrication notes along with Gerbers, drill files, BOM, pick-and-place files, assembly drawings, test requirements, and approved alternates.<\/p>\n\n\n\n<p>ANZER\u2019s broader <a href=\"https:\/\/www.anzer-usa.com\/pcb-manufacturer\">PCB manufacturing services<\/a> and PCB assembly capabilities are strongest when the build package clearly defines these requirements before the first build.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Common dielectric material choices in PCB assemblies<\/h2>\n\n\n\n<p>Different materials serve different applications. The table below is a practical selection guide, not a substitute for engineering validation.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Material category<\/th><th>Common fit<\/th><th>Watch-outs<\/th><\/tr><\/thead><tbody><tr><td>Standard FR-4<\/td><td>General industrial controls, low-to-moderate speed boards, many commercial PCBAs<\/td><td>Dk and Df vary by grade and construction. Do not use generic FR-4 assumptions for high-speed\/RF designs.<\/td><\/tr><tr><td>High-Tg FR-4<\/td><td>Higher thermal exposure, lead-free soldering, denser assemblies, improved thermal margin<\/td><td>Confirm Tg, Td, CTE, and approved laminate alternates.<\/td><\/tr><tr><td>Low-loss laminate<\/td><td>High-speed digital, RF, microwave, lower insertion loss applications<\/td><td>Higher cost, tighter sourcing control, stronger documentation needed.<\/td><\/tr><tr><td>Polyimide \/ flex materials<\/td><td>Flexible circuits, rigid-flex, heat-resistant applications<\/td><td>Bend radius, adhesive system, copper type, and assembly handling matter.<\/td><\/tr><tr><td>Metal-core PCB materials<\/td><td>LED, power electronics, heat-spreading applications<\/td><td>Thermal path and electrical isolation must be reviewed together.<\/td><\/tr><tr><td>Ceramic substrates<\/td><td>High thermal conductivity, high frequency, specialized applications<\/td><td>Cost, brittleness, assembly process, and supplier availability must be considered.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Related internal reading: <a href=\"https:\/\/www.anzer-usa.com\/resources\/ceramic-vs-fr4-substrates-pcb-substrate-selection\/\">ceramic vs FR-4 substrate selection<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What OEMs should include in a dielectric-sensitive PCB assembly RFQ<\/h2>\n\n\n\n<p>A dielectric-sensitive RFQ should include more than Gerber files and a BOM.<\/p>\n\n\n\n<p>Before requesting a quote, prepare:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Board stackup with dielectric thicknesses<\/li>\n\n\n\n<li>Material callout and approved alternates<\/li>\n\n\n\n<li>Dk and Df expectations where relevant<\/li>\n\n\n\n<li>Target impedance and tolerance<\/li>\n\n\n\n<li>Copper weight and finished board thickness<\/li>\n\n\n\n<li>Operating voltage and isolation requirements<\/li>\n\n\n\n<li>Environmental exposure, including humidity, temperature, vibration, dust, chemicals, or outdoor use<\/li>\n\n\n\n<li>Required surface finish<\/li>\n\n\n\n<li>IPC class expectation<\/li>\n\n\n\n<li>Coating or potting requirement<\/li>\n\n\n\n<li>Functional test, ICT, flying probe, hipot, burn-in, or environmental test expectations<\/li>\n\n\n\n<li>Assembly drawing and polarity notes<\/li>\n\n\n\n<li>Revision-controlled BOM<\/li>\n\n\n\n<li>Lifecycle stage: prototype, pilot, or production<\/li>\n\n\n\n<li>Required documentation and traceability<\/li>\n<\/ul>\n\n\n\n<p>For many OEMs, this is where a quick DFM review saves time. ANZER supports prototype, pre-production, and production PCB assembly with no minimum order quantity, which is useful when the first build still needs engineering feedback before scaling.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Mistakes to avoid<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Treating \u201cFR-4\u201d as a complete material specification<\/h3>\n\n\n\n<p>FR-4 is a family of materials. It is not a complete engineering instruction for every application. Specify the actual laminate requirement or approved alternatives when dielectric behavior matters.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Ignoring frequency<\/h3>\n\n\n\n<p>Dk and Df should be considered at relevant frequencies. A value from a datasheet may not represent how the board behaves in the finished design.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Separating PCB design from assembly reality<\/h3>\n\n\n\n<p>Dielectric decisions affect soldering, inspection, coating, potting, testing, rework, and field reliability. DFM should happen before production release.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Leaving impedance notes out of the RFQ<\/h3>\n\n\n\n<p>If controlled impedance is required, document target impedance, tolerance, stackup, reference planes, and test expectations.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Choosing material only by unit price<\/h3>\n\n\n\n<p>A cheaper laminate can become expensive if it causes redesign, test failure, field instability, or documentation gaps in regulated electronics.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How ANZER helps reduce dielectric-related assembly risk<\/h2>\n\n\n\n<p>ANZER is a U.S.-based electronic contract manufacturer in Akron, Ohio, supporting PCB assembly, SMT, through-hole, mixed technology, testing, conformal coating, potting, wire harness, box build, prototype, pre-production, and production work.<\/p>\n\n\n\n<p>For dielectric-sensitive projects, our role is to help OEM teams connect the design package to the manufacturing process. That includes reviewing DFM issues, confirming assembly feasibility, planning inspection, supporting test strategy, and protecting process control through production.<\/p>\n\n\n\n<p>ANZER supports:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>SMT, through-hole, and mixed assembly<\/li>\n\n\n\n<li>AOI and X-ray inspection where applicable<\/li>\n\n\n\n<li>ICT, flying probe, functional testing, and burn-in<\/li>\n\n\n\n<li>In-house conformal coating and potting<\/li>\n\n\n\n<li>IPC Class 2 and Class 3 workmanship capability<\/li>\n\n\n\n<li>ISO 9001, ISO 13485, and AS9100D quality-system alignment<\/li>\n\n\n\n<li>Prototype-to-production manufacturing with no minimum order quantity<\/li>\n<\/ul>\n\n\n\n<p>If your board has controlled impedance, high voltage, high speed, RF behavior, harsh environmental exposure, or regulated-industry documentation needs, dielectric review should happen before the build is released.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusion<\/h2>\n\n\n\n<p>PCB assembly dielectric properties are not just material datasheet values. They influence signal integrity, insulation, thermal behavior, moisture stability, flame performance, testing, and long-term reliability.<\/p>\n\n\n\n<p>For OEM teams, the best step is to make dielectric requirements visible in the design package and RFQ. Specify the stackup, material requirements, impedance needs, voltage environment, coating or potting expectations, and test plan before fabrication and assembly.<\/p>\n\n\n\n<p>If your PCB design needs DFM review before prototype, pilot, or production, ANZER USA can help review the build package and identify manufacturability risks before they become production problems.<\/p>\n\n\n\n<p><strong>Request a PCB assembly review or quote:<\/strong> <a href=\"https:\/\/www.anzer-usa.com\/get-quote\">Get a Quote<\/a><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">FAQs<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">What are dielectric properties in PCB assembly?<\/h3>\n\n\n\n<p>Dielectric properties describe how the non-conductive PCB substrate behaves electrically, thermally, chemically, and mechanically. They affect insulation, impedance, signal speed, dielectric loss, voltage breakdown, heat movement, moisture stability, and flame behavior.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Why does dielectric constant matter in PCB design?<\/h3>\n\n\n\n<p>Dielectric constant, or Dk, affects signal propagation speed, capacitance, controlled impedance, crosstalk, and timing. It is especially important in high-speed digital, RF, microwave, and controlled-impedance boards.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What is the difference between Dk and Df?<\/h3>\n\n\n\n<p>Dk describes how the dielectric material affects signal speed and capacitance. Df, or dissipation factor, describes how much signal energy is lost as heat. Dk is tied to impedance and timing, while Df is tied to signal loss.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Is FR-4 always good enough for PCB assemblies?<\/h3>\n\n\n\n<p>No. Standard FR-4 works for many general PCB assemblies, but high-speed, RF, high-temperature, high-voltage, or harsh-environment electronics may need higher-performance laminate or tighter material control.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What should I send ANZER for a dielectric-sensitive PCB assembly quote?<\/h3>\n\n\n\n<p>Send the Gerbers, BOM, pick-and-place file, assembly drawing, stackup, material callout, approved alternates, impedance requirements, operating voltage, environmental exposure, coating or potting requirement, and testing expectations.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>PCB assembly dielectric properties control more than insulation. They affect signal speed, impedance, leakage risk, breakdown voltage, heat movement, moisture stability, flame behavior, and long-term field reliability. For OEMs, the main point is simple: dielectric requirements should be reviewed before PCB fabrication and assembly, not&#8230;<\/p>\n","protected":false},"author":6,"featured_media":2410,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[161],"tags":[136,116,76,137],"class_list":["post-1223","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-design-for-manufacturability","tag-contract-pcb-assembly","tag-electronic-circuit-design","tag-ohio-made","tag-pcb-design-assembly"],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.anzer-usa.com\/resources\/wp-content\/uploads\/2024\/03\/Dielectric-Layers.jpg?fit=1200%2C600&ssl=1","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/posts\/1223","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/comments?post=1223"}],"version-history":[{"count":5,"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/posts\/1223\/revisions"}],"predecessor-version":[{"id":0,"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/posts\/1223\/revisions\/0"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/media\/2410"}],"wp:attachment":[{"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/media?parent=1223"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/categories?post=1223"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.anzer-usa.com\/resources\/wp-json\/wp\/v2\/tags?post=1223"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}